CALIBRATOR The Martel BETA DPC-300A isn’t just a replacement for the old “box” calibrator. With full digital precision and accuracy, a dual pressure system and a built-in loop calibrator function, it’s a pressure calibration powerhouse in a portable format. A dual pressure system means you can use regulated plant air or internally generated pressure sources for calibration. The internal pump goes up to 300 psi with pushbutton ease. Exact values are set using the fine vernier control knob. Plant air, up to 100 psi is controlled with a precision regulator for low inches of water on up. Speaking of inches of water column, the user can elect to display the pressure signal in any of 13 engineering units. As they say on TV, “but wait, there’s more”: a built-in loop calibrator with 24 VDC instrument loop power supply; high capacity rechargeable NiMH batteries for 50 hours of use or 125 cycles of pumping to 300 psi, Martel’s trademark 3 key function menus, ClearBrite™ LCD display and multimode operation to name a few. This high performance calibrator comes in a high performance housing. It’s a rugged IP67 rated blown resin case that can take a pounding when used in the field. IP67 means waterproof including immersion when the case is closed. General Features Dual pressure systems Regulated plant air to 100 psi / 7 bar Integral electric pump to 300 psi / 20 bar Pressure accuracy up to ±0.025% reading Built-in loop calibrator with 24 V loop power External pressure module interface 24 VDC instrument power supply User’s selection of 13 engineering units Heavy duty IP67 case (cover closed) Long life rechargeable NiMH battery power Specifications Instrument Setup Recall    5 setups; last used setup displays on power-up Environmental Operating Temperature    -10 °C to +50 °C Storage Temperature    -20 °C to +60 °C Battery Type    9 cell NiMH rechargeable; 3700 mAh @ 10.8V Battery Life  (fully-charged)    Approx. 50 hours (only measurement or with external pressure supply) 125 pump cycles to 20 bar 300 pump cycles to 10 bar 1,000 pump cycles to 2 bar Physical Dimensions    15.25" x 12” x 7" (387.4 x 304.8 x 177.8 mm) Weight    15.5 lbs. (approx. 7 kg) EMI/RFI Conformance    EN50082-1: 1992 and EN55022: 1994 Class B Safety    EN/IEC 61010-1:2010 3rd Edition (Low Voltage Directive) Connectors/Ports    1/8” NPT; BetaPort-P pressure module jack; power jack Included Accessories    Reference manual, NIST-traceable calibration certificate, test leads and hose kit. Ranges Pressure    -12 to 300.00 psi / -0.8 to 20 bar / -80 to 2000 kPa mA    0 to 24.000 mA Volts    0 to 30.000 VDC Engineering Units    psi, bar, mbar, kPa, MPa, kgcm2, mmH2O @ 4°C, mmH2O @ 20°C, cmH2O @ 4°C, cmH2O @ 20°C, inH2O @ 4°C, inH2O @ 20°C, inH2O @ 60°F, mmHg @ 0°C, inHg @ 0°C Accuracy Pressure    6 months: ±0.025% of reading ±0.01% of full scale 1 year: ±0.035% of reading ±0.01% of full scale mA    ±0.015% of reading ±0.002mA Volts    ±0.015% of reading ±0.002V Temperature Effect (all functions) No effect on accuracy on all functions from 15°C to 35°C Add ±0.002% F.S./°C for temps outside of 15°C to 35°C